Rainbow-electronics W90P710CDG Manual de usuario descargar pdf (Pagina 243)

100

101

W90P710CD/W90P710CDG

Publication Release Date: September 19, 2006

- 243 - Revision B2

SD BIST Register (SDBIST)

SDBIST

0xFFF0_7014

R/W SD BIST Register 0x0000_0000

31 30 29 28 27 26 25 24

Reserved

23 22 21 20 19 18 17 16

Reserved

15 14 13 12 11 10 9 8

Reserved

7 6 5 4 3 2 1 0

Reserved BistFail Finish BISTEN

BITS DESCRIPTIONS

[31:4]

Reserved -

[3:2]

BistFail

BIST Fail

The BistFail indicates if the BIST test fails or succeeds. If the BistFail is

low at the end, the embedded SRAM pass the BIST test, otherwise, it is

faulty. The BistFail will be high once the BIST detects the error and

remains high during the BIST operation.

The BistFail is a write clear field. Write 1 to this field clears the content

and write 0 has no effect.

[1]

Finish

BIST Operation Finish

It indicates the end of the BIST operation. When BIST controller finishes

all operations, this bit will be set high.

This bit is a write clear field. Write 1 to this field clears the content and

write 0 has no effect.

[0]

BISTEN

BIST Enable

The BISTEN is used to enable the BIST operation. If high enables the

BIST controller to do embedded SRAM test. This bit is also used to do

the reset for BIST circuit. It is necessary to reset the BIST circuit one

clock cycle at least in order to initialize the BIST properly.

The BISTEN can be disabled by write 0.

1 2 ... 238 239 240 241 242 243 244 245 246 247 248 ... 551 552

Comentarios a estos manuales

Sin comentarios

Rainbow-electronics W90P710CDG Manual de usuario Pagina 243

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Rainbow-electronics W90P710CDG