Rainbow-electronics GM862-QUAD-PY Manual de usuario descargar pdf (Pagina 369)

100

101

AT Commands Reference Guide

80000ST10025a Rev. 5 - 09/07/08

#SEMAIL - E-mail Sending With GPRS Context Activation SELINT 2

To complete the operation send Ctrl-Z char (0x1A hex); to exit without

writing the message send ESC char (0x1B hex).

If e-mail message is successfully sent, then the response is OK.

If message sending fails for some reason, an error code is reported

Note: Care must be taken to ensure that during the command execution,

no other commands are issued.

To avoid malfunctions is suggested to wait for the OK or ERROR / +CMS

ERROR:<err> response before issuing further commands.

Note: sending an e-mail with an image attachment can take quite a long

time since it can be over 50Kb to send and can take more than 1 minute.

Note: this command is not allowed if GSM context is active (see

AT#SGACT=0,1).

AT#SEMAIL=?

Test command returns the OK result code.

Example

AT#SEMAIL="[email protected]","subject of the mail",1

>message body… this is the text of the mail message…

CTRL-Z

..wait..

Message has been sent.

3.5.7.6.6 E-mail GPRS Context Activation - #EMAILACT

#EMAILACT - E-mail GPRS Context Ativation SELINT 0 / 1

AT#EMAILACT[=

[<mode>]]

Execution command deactivates/activates the GPRS context, eventually

proceeding with the authentication with the parameters given with #PASSW

and #USERID.

Parameter:

<mode> - GPRS context activation mode

0 - GPRS context deactivation request

1 - GPRS context activation request

Note: issuing AT#EMAILACT<CR> reports the current status of the GPRS

context for the e-mail, in the format:

#EMAILACT: <status>

where:

1 2 ... 364 365 366 367 368 369 370 371 372 373 374 ... 433 434

Comentarios a estos manuales

Sin comentarios

Rainbow-electronics GM862-QUAD-PY Manual de usuario Pagina 369

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Gps Rainbow-electronics GM862-QUAD-PY