Rainbow-electronics GM862-QUAD-PY Manual de usuario Pagina 182

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 434
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 181
AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 182 of 434
+CSCB -Select Cell Broadcast Message Types SELINT 0 / 1
[<mode>
[,<mids>
[,<dcss>]]]]
received by the device.
Parameter:
<mode>
0 - the message types defined by <mids> and <dcss> are accepted
(factory default)
1 - the message types defined by <mids> and <dcss> are rejected
<mids> - Message Identifiers, string type: all different possible
combinations of the CBM message identifiers; default is empty
string (“”).
<dcss> - Data Coding Schemes, string type: all different possible
combinations of CBM data coding schemes; default is empty string
(“”).
Note: the current settings are stored through +CSAS
Note: issuing AT+CSCB<CR> is the same as issuing the Read command.
Note: issuing AT+CSCB=<CR> is the same as issuing the command
AT+CSCB=0<CR>.
AT+CSCB?
Read command reports the current value of parameters <mode>, <mids>
and <dcss>.
AT+CSCB=?
Test command returns the range of values for parameter <mode>.
Example
AT+CSCB?
+CSCB: 1,"",""
OK (all CBMs are accepted, none is rejected)
AT+CSCB=0,"0,1,300-315,450","0-3"
OK
Reference GSM 07.05, GSM 03.41, GSM 03.38.
CSCB -Select Cell Broadcast Message Types SELINT 2
AT+CSCB=
[<mode>[,<mids>
[,<dcss>]]]
Set command selects which types of Cell Broadcast Messages are to be
received by the device.
Parameters:
<mode>
0 - the message types defined by <mids> and <dcss> are accepted
(factory default)
1 - the message types defined by <mids> and <dcss> are rejected
<mids> - Message Identifiers, string type: all different possible
combinations of the CBM message identifiers; default is empty
string (“”).
<dcss> - Data Coding Schemes, string type: all different possible
combinations of CBM data coding schemes; default is empty string
(“”).
Vista de pagina 181
1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 433 434

Comentarios a estos manuales

Sin comentarios