Rainbow-electronics GM862-QUAD-PY Manual de usuario descargar pdf (Pagina 269)

100

101

AT Commands Reference Guide

80000ST10025a Rev. 5 - 09/07/08

#V24 - V24 Output Pins Control SELINT 2

<pin> - AT commands serial port interface hardware pin:

0 - DCD (Data Carrier Detect)

1 - CTS (Clear To Send)

2 - RI (Ring Indicator)

3 - DSR (Data Set Ready)

4 - DTR (Data Terminal Ready). This is not an output pin: we maintain this

value only for backward compatibility, but trying to set its state raises the

result code “ERROR”

5 - RTS (Request To Send). This is not an output pin: we maintain this

value only for backward compatibility, but trying to set its state raises the

result code “ERROR”

<state> - State of AT commands serial port interface output hardware

pins(0, 1, 2, 3) when pin is in GPIO mode (see #V24CFG):

0 - Low

1 - High

Note: if <state> is omitted the command returns the actual state of the pin

<pin>.

AT#V24?

Read command returns actual state for all the pins (either output and input)

in the format:

#V24: <pin1>,<state1>[<CR><LF>

#V24: <pin2>,<state2>[...]]

where

<pinn> - AT command serial port interface HW pin

<staten> - AT commands serial port interface hardware pin state

AT#V24=?

Test command reports supported range of values for parameters <pin> and

<state>.

3.5.7.1.38 AXE Pin Reading - #AXE

#AXE - AXE Pin Reading SELINT 2

AT#AXE

Execution command causes the ME to return the current state of AXE pin in

the format:

#AXE: <state>

where:

<state>

0 - Low

..1 - High

AT#AXE=?

Test command returns the OK result code.

1 2 ... 264 265 266 267 268 269 270 271 272 273 274 ... 433 434

Comentarios a estos manuales

Sin comentarios

Rainbow-electronics GM862-QUAD-PY Manual de usuario Pagina 269

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Gps Rainbow-electronics GM862-QUAD-PY