Rainbow-electronics GM862-QUAD-PY Manual de usuario descargar pdf (Pagina 135)

AT Commands Reference Guide

80000ST10025a Rev. 5 - 09/07/08

+CALA - Alarm Management SELINT 0 / 1

Note: if no alarm is present a <CR><LF> is issued.

AT+CALA=?

Test command returns the list of supported index values (currently just 0),

alarm types and maximum length of the text to be displayed, in the format:

+CALA: (list of supported <n>s),(list of supported <type>s),<tlength>

where:

<n> and <type> as before

<tlength> - maximum <text> field length, integer type

Note: an enhanced version of Test command has been defined,

AT+CALA=??, providing the range of available values for <rlenght> and

<silent> too.

AT+CALA=??

Test command returns the list of supported index values (currently just 0),

alarm types, maximum length of the text to be displayed, maximum length

of <recurr> and supported <silent>s, in the format:

+CALA: (list of supported <n>s),(list of supported <type>s),<tlength>,

<rlength>,(list of supported <silent>s)

where:

<n>, <type>, <tlength> and <silent> as before

<rlength> - maximum <recurr> field length, integer type

Example

AT+CALA="02/09/07,23:30:00+00"

Reference ETSI 07.07, ETSI 27.007

+CALA - Alarm Management SELINT 2

AT+CALA=

[,<text>[,<recurr>

[,<silent>]]]]]

Set command stores in the internal Real Time Clock an alarm time with

respective settings. It is possible to set up a recurrent alarm for one or more

days in the week.

Currently just one alarm can be set.

When the RTC time reaches the alarm time then the alarm starts, the

behaviour of the MODULE depends upon the setting <type> and if the

device was already ON at the moment when the alarm time had come.

Parameters:

<time> - current alarm time as quoted string

“” - (empty string) deletes the current alarm and resets all the +CALA

parameters to the “factory default” configuration

"hh:mm:ss±zz" - format to be used only when issuing +CALA with

parameter <recurr> too.

"yy/MM/dd,hh:mm:ss±zz" - generic format: it’s the same as defined for

+CCLK (see)

<n> - index of the alarm

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 433 434

Comentarios a estos manuales

Sin comentarios

Rainbow-electronics GM862-QUAD-PY Manual de usuario Pagina 135

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Gps Rainbow-electronics GM862-QUAD-PY