Rainbow-electronics ATtiny10 Manual de usuario descargar pdf (Pagina 8)

8127B–AVR–08/09

ATtiny4/5/9/10

4.4 General Purpose Register File

The Register File is optimized for the AVR Enhanced RISC instruction set. In order to achieve

the required performance and flexibility, the following input/output schemes are supported by the

• One 8-bit output operand and one 8-bit result input

• Two 8-bit output operands and one 8-bit result input

• One 16-bit output operand and one 16-bit result input

Figure 4-2 below shows the structure of the 16 general purpose working registers in the CPU.

Figure 4-2. AVR CPU General Purpose Working Registers

Note: A typical implementation of the AVR register file includes 32 general prupose registers but

ATtiny4/5/9/10 implement only 16 registers. For reasons of compatibility the registers are num-

bered R16...R31, not R0...R15.

Most of the instructions operating on the Register File have direct access to all registers, and

most of them are single cycle instructions.

4.4.1 The X-register, Y-register, and Z-register

Registers R26..R31 have some added functions to their general purpose usage. These registers

are 16-bit address pointers for indirect addressing of the data space. The three indirect address

registers X, Y, and Z are defined as described in Figure 4-3.

R16

R17

General R18

Purpose …

Working R26 X-register Low Byte

Registers R27 X-register High Byte

R28 Y-register Low Byte

R29 Y-register High Byte

R30 Z-register Low Byte

R31 Z-register High Byte

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 165 166

Sin comentarios

Rainbow-electronics ATtiny10 Manual de usuario Pagina 8