Rainbow-electronics ATmega128RFA1 Manual de usuario Pagina 292

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 524
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 291
292
8266A-MCU Wireless-12/09
ATmega128RFA1
18.11.41 OCR4CL – Timer/Counter4 Output Compare Register C Low Byte
Bit 7 6 5 4 3 2 1 0
NA ($AC) OCR4CL7:0 OCR4CL
Read/Write R RW RW RW RW RW RW RW
Initial Value 0 0 0 0 0 0 0 0
The Output Compare Registers contain a 16-bit value that is continuously compared
with the counter value (TCNT4). A match can be used to generate an Output Compare
interrupt. The Output Compare Registers are 16-bit in size. To ensure that both the high
and low bytes are written simultaneously when the CPU writes to these registers, the
access is performed using an 8-bit temporary High Byte Register (TEMP). This
temporary register is shared by all the other 16-bit registers. See section "Accessing 16-
bit Registers" for details.
Bit 7:0 – OCR4CL7:0 - Timer/Counter4 Output Compare Register Low Byte
18.11.42 ICR4H – Timer/Counter4 Input Capture Register High Byte
Bit 7 6 5 4 3 2 1 0
NA ($A7) ICR4H7:0 ICR4H
Read/Write R R R R R R R R
Initial Value 0 0 0 0 0 0 0 0
The Timer/Counter4 has only limited functionality. It is not connected to any I/O pin.
Therefore the contents of this register is never updated with the counter (TCNT4) value.
The Input Capture Register is 16-bit in size. To ensure that both the high and low bytes
are read simultaneously when the CPU accesses these registers, the access is
performed using an 8-bit temporary High Byte Register (TEMP). This temporary register
is shared by all the other 16-bit registers. See section "Accessing 16-bit Registers" for
details.
Bit 7:0 – ICR4H7:0 - Timer/Counter4 Input Capture Register High Byte
18.11.43 ICR4L – Timer/Counter4 Input Capture Register Low Byte
Bit 7 6 5 4 3 2 1 0
NA ($A6) ICR4L7:0 ICR4L
Read/Write R R R R R R R R
Initial Value 0 0 0 0 0 0 0 0
The Timer/Counter4 has only limited functionality. It is not connected to any I/O pin.
Therefore the contents of this register is never updated with the counter (TCNT4) value.
The Input Capture Register is 16-bit in size. To ensure that both the high and low bytes
are read simultaneously when the CPU accesses these registers, the access is
performed using an 8-bit temporary High Byte Register (TEMP). This temporary register
is shared by all the other 16-bit registers. See section "Accessing 16-bit Registers" for
details.
Bit 7:0 – ICR4L7:0 - Timer/Counter4 Input Capture Register Low Byte
Vista de pagina 291
1 2 ... 287 288 289 290 291 292 293 294 295 296 297 ... 523 524

Comentarios a estos manuales

Sin comentarios