Rainbow-electronics DS1374 Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware De La Computadora Rainbow-electronics DS1374. Rainbow Electronics DS1374 User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 15
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
General Description
The DS1374 is a 32-bit binary counter designed to contin-
uously count time in seconds. An additional counter gen-
erates a periodic alarm or serves as a watchdog timer. If
disabled, this counter can be used as 3 bytes of non-
volatile (NV) RAM. Separate output pins are provided for
an interrupt and a square wave at one of four selectable
frequencies. A precision temperature-compensated refer-
ence and comparator circuit monitor the status of V
CC
to
detect power failures, provide a reset output, and auto-
matically switch to the backup supply when necessary.
Additionally, the reset pin is monitored as a pushbutton
input for externally generating a reset. The device is pro-
grammed serially through an I
2
C™ serial interface.
Applications
Portable Instruments
Point-of-Sale Equipment
Medical Equipment
Telecommunications
Features
32-Bit Binary Counter
Second Binary Counter Provides Time-of-Day
Alarm, Watchdog Timer, or NV RAM
Separate Square-Wave and Interrupt Output Pins
I
2
C Serial Interface
Automatic Power-Fail Detect and Switch Circuitry
Single-Pin Pushbutton Reset Input/Open-Drain
Reset Output
Low-Voltage Operation
Trickle-Charge Capability
-40°C to +85°C Operating Temperature Range
10-Pin µSOP, 16-Pin SO
Available in a Surface-Mount Package with an
Integrated Crystal (DS1374C)
Underwriters Laboratory (UL) Recognized
DS1374
I
2
C, 32-Bit Binary Counter Watchdog RTC with
Trickle Charger and Reset Input/Output
______________________________________________ Maxim Integrated Products 1
Ordering Information
DS1374
X1 X2
CRYSTAL
V
CC
V
CC
SQW
SCL
SDA
INT
RST
INT
RST
GND
V
BACKUP
V
CC
V
CC
N.O.
PUSHBUTTON
RESET
PRIMARY
BATTERY,
RECHARGEABLE
BATTERY, OR
SUPER CAPACITOR
CPU
RPU
RPU = t
r
/C
B
RPU
Typical Operating Circuit
Rev 1; 9/04
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
PART
TEMP RANGE
PIN-
PACKAGE
TOP MARK
DS1374U-18
-40°C to +85°C
10 µSOP DS1374-18
DS1374U-3
-40°C to +85°C
10 µSOP DS1374-3
DS1374U-33
-40°C to +85°C
10 µSOP DS1374-33
DS1374C-18
-40°C to +85°C 16 SO, 0.300"
DS1374C-18
DS1374C-3
-40°C to +85°C 16 SO, 0.300"
DS1374C-3
DS1374C-33
-40°C to +85°C 16 SO, 0.300"
DS1374C-33
I
2
C is a trademark of Philips Corp. Purchase of I
2
C compo-
nents of Maxim Integrated Products, Inc., or one of its subli-
censed Associated Companies, conveys a license under the
Philips I
2
C Patent Rights to use these components in an I
2
C
system, provided that the system conforms to the I
2
C Standard
Specification as defined by Philips.
Pin Configurations appear at the end of the data sheet.
Vista de pagina 0
1 2 3 4 5 6 ... 14 15

Indice de contenidos

Pagina 1 - Typical Operating Circuit

General DescriptionThe DS1374 is a 32-bit binary counter designed to contin-uously count time in seconds. An additional counter gen-erates a periodic

Pagina 2 - ABSOLUTE MAXIMUM RATINGS

DS1374address range 00h–03h. When the counter is read, thecurrent time of day is latched into a register, which isoutput on the serial data line while

Pagina 3 - DC ELECTRICAL CHARACTERISTICS

Special Purpose RegistersThe DS1374 has two additional registers (07h–08h) thatcontrol the WD/ALM counter and the square-wave, inter-rupt, and reset o

Pagina 4 - AC ELECTRICAL CHARACTERISTICS

DS1374Status Register (08h)Bit 7/Oscillator Stop Flag (OSF). A logic 1 in this bitindicates that the oscillator either is stopped or wasstopped for so

Pagina 5

Assume that a system power supply of 3.3V is appliedto VCCand a super cap is connected to VBACKUP. Alsoassume the trickle charger has been enabled wit

Pagina 6 - C Serial Bus

DS1374I2C, 32-Bit Binary Counter Watchdog RTC withTickle Charger and Reset Input/Output 14 ___________________________________________________________

Pagina 7 - = +3.3V, T

Handling, PC Board Layout, andAssemblyThe DS1374C package contains a quartz tuning-forkcrystal. Pick-and-place equipment can be used, butprecautions s

Pagina 8 - Pin Description

DS1374I2C, 32-Bit Binary Counter Watchdog RTC withTrickle Charger and Reset Input/Output 2 ___________________________________________________________

Pagina 9 - Time-of-Day Counter

DS1374I2C, 32-Bit Binary Counter Watchdog RTC withTrickle Charger and Reset Input/Output _____________________________________________________________

Pagina 10 - Pushbutton Reset Functions

DS1374I2C, 32-Bit Binary Counter Watchdog RTC withTrickle Charger and Reset Input/Output 4 ___________________________________________________________

Pagina 11 - Special Purpose Registers

DS1374I2C, 32-Bit Binary Counter Watchdog RTC withTrickle Charger and Reset Input/Output _____________________________________________________________

Pagina 12 - Trickle-Charge Register (10h)

DS1374I2C, 32-Bit Binary Counter Watchdog RTC withTrickle Charger and Reset Input/Output 6 ___________________________________________________________

Pagina 13 - C Serial Data Bus

DS1374I2C, 32-Bit Binary Counter Watchdog RTC withTrickle Charger and Reset Input/Output _____________________________________________________________

Pagina 14 - C Read Protocol

DS1374I2C, 32-Bit Binary Counter Watchdog RTC withTrickle Charger and Reset Input/Output 8 ___________________________________________________________

Pagina 15 - SO (0.300")

Detailed DescriptionThe DS1374 is a real-time clock with an I2C serial inter-face. It provides elapsed seconds from a user-definedstarting point in a

Comentarios a estos manuales

Sin comentarios