Rainbow-electronics DS1081L Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware De La Computadora Rainbow-electronics DS1081L. Rainbow Electronics DS1081L User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 5
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
General Description
The DS1081L is a spread-spectrum clock modulator IC
that reduces EMI in high clock-frequency-based, digital
electronic equipment.
Using an integrated phase-locked loop (PLL), the
DS1081L accepts an input clock signal in the range of
20MHz to 134MHz and delivers a spread-spectrum mod-
ulated output clock signal. The PLL modulates, or dithers,
the output clock about the center input frequency at a
pin-selectable magnitude and dither rate, allowing direct
EMI control and optimization. In addition, through an
enable pin the dithering can be enabled or disabled for
easy comparison of system performance during EMI test-
ing. This same input pin also allows the DS1081L output
to be tri-stated.
By dithering the system clock, all the address, data,
and timing signals generated from this signal are also
dithered so that the measured EMI at the fundamental
and harmonic frequencies is greatly reduced. This is
accomplished without changing clock rise/fall times or
adding the space, weight, design time, and cost asso-
ciated with mechanical shielding.
The DS1081L is provided in an 8-pin TSSOP package
and operates over a full automotive temperature range
of -40°C to +125°C.
Applications
LCD Panels for TVs, Desktop Monitors, and
Notebook and Tablet PCs
Automotive Telematics and Infotainment
Printers
Features
Modulates a 20MHz to 134MHz Clock with Center
Spread-Spectrum Dithering
Selectable Spread-Spectrum Modulation
Magnitudes of:
±0.5%
±1.0%
±1.5%
±2.0%
Low 75ps Cycle-to-Cycle Jitter
Spread-Spectrum Disable Mode
Pin Compatible with Alliance/PulseCore
Semiconductor P2040 Series Devices
Clock Output Disable
Low Cost
Low Power Consumption
3.3V Single Voltage Supply
-40°C to +125°C Temperature Range
Small 8-Pin TSSOP Package
DS1081L
20MHz to 134MHz Spread-Spectrum
Clock Modulator for LCD Panels
______________________________________________
Maxim Integrated Products
1
Rev 0; 4/07
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
+
Denotes lead-free package.
T
Denotes tape-and-reel.
Ordering Information
PART TEMP RANGE PIN-PACKAGE
DS1081LE+ -40°C to +125°C 8 TSSOP
DS1081LE+T -40°C to +125°C 8 TSSOP
Block Diagram
GND
SSO
PLL WITH CENTER-
DITHERED
SPREAD
SPECTRUM
CONFIGURATION
DECODE AND
CONTROL
SMSEL1
CLKIN
SMSEL2
f
SSO
= 20MHz to
134MHz (DITHERED)
V
CC
V
CC
f
IN
= 20MHz TO
134MHz
DS1081L
CRSEL
SSEN
ENABLE
LOGIC
Pin Configuration and Typical Operating Circuit appear at
end of data sheet.
SSO
GND
1
2
8
7 CRSELSMSEL1
SMSEL2
CLKIN
TSSOP
(4.40mm)
TOP VIEW
3
4
6
5
DS1081L
V
CC
SSEN
Pin Configuration
Vista de pagina 0
1 2 3 4 5

Indice de contenidos

Pagina 1 - Denotes tape-and-reel

General DescriptionThe DS1081L is a spread-spectrum clock modulator ICthat reduces EMI in high clock-frequency-based, digitalelectronic equipment.Usin

Pagina 2 - AC ELECTRICAL CHARACTERISTICS

ABSOLUTE MAXIMUM RATINGSRECOMMENDED OPERATING CONDITIONS(TA= -40°C to +125°C, unless otherwise noted.)Stresses beyond those listed under “Absolute Max

Pagina 3

DS1081L20MHz to 134MHz Spread-SpectrumClock Modulator for LCD Panels_____________________________________________________________________3Typical Oper

Pagina 4 - Pin Description

Detailed DescriptionThe DS1081L modulates an input clock to generate acenter-dithered spread-spectrum output. A 20MHz to134MHz clock is applied to the

Pagina 5 - Application Information

DS1081L20MHz to 134MHz Spread-SpectrumClock Modulator for LCD PanelsMaxim cannot assume responsibility for use of any circuitry other than circuitry e

Comentarios a estos manuales

Sin comentarios