Rainbow-electronics MAX5259 Manual de usuario

Busca en linea o descarga Manual de usuario para Sensores Rainbow-electronics MAX5259. Rainbow Electronics MAX5259 User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 20
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
General Description
The MAX5258/MAX5259 are +3V/+5V single-supply,
digital serial-input, voltage-output, 8-bit octal digital-to-
analog converters (DACs). Internal precision buffers
swing Rail-to-Rail
®
, and the reference input range
extends from ground to the positive supply. The +5V
(MAX5258) and the +3V (MAX5259) feature a 10µA
(max) shutdown mode.
The serial interface is double-buffered. A 16-bit input
shift register is followed by eight 8-bit input registers
and eight 8-bit DAC registers. The 16-bit serial word
consists of two “don’t care” bits, three address bits,
three control bits, and eight data bits. The input and
DAC registers can both be updated independently or
simultaneously with a single software command. The
asynchronous control input (LDAC) provides simultane-
ous updating of all eight DAC registers.
The interface is compatible with SPI™, QSPI™ (CPOL =
CPHA = 0 or CPOL = CPHA = 1), and MICROWIRE™.
A buffered digital data output allows daisy-chaining of
serial devices.
The MAX5258/MAX5259 are available in a 16-pin QSOP
package.
________________________Applications
Digital Gain and Offset Adjustment
Programmable Attenuators
Programmable Current Sources
Portable Instruments
Features
+2.7V to +5.5V Single-Supply Operation
Low Supply Current: 1.3mA
Low-Power Shutdown Mode
0.54mA (MAX5259)
0.80mA (MAX5258)
±1LSB DNL (max)
±1LSB INL (max)
Ground to V
DD
Reference Input Range
Output Buffer Amplifiers Swing Rail-to-Rail
10MHz Serial Interface, SPI, QSPI (CPOL = CPHA
= 0 or CPOL = CPHA = 1), and MICROWIRE-
Compatible
Double-Buffered Registers for Synchronous
Updating
Serial Data Output for Daisy-Chaining
Ultra-Small 16-Pin QSOP Package
+3V/+5V, Low-Power, 8-Bit Octal DACs
with Rail-to-Rail Output Buffers
________________________________________________________________ Maxim Integrated Products 1
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
OUTB OUTC
OUTD
DOUT
DIN
CS
SCLK
OUTH
OUTG
TOP VIEW
MAX5258
MAX5259
QSOP
OUTA
OUTE
OUTF
GND
V
DD
REF
LDAC
Pin Configuration
19-1844; Rev 1; 4/01
Ordering Information
PART TEMP. RANGE PIN- PACK AGE
SU PPL Y
VO LT A G E
( V)
MAX5258EEE -40
o
C to +85
o
C 16 QSOP +5.0
MAX5259EEE -40
o
C to +85
o
C 16 QSOP +3.0
SPI and QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corp.
MAX5258/MAX5259
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
Vista de pagina 0
1 2 3 4 5 6 ... 19 20

Indice de contenidos

Pagina 1 - MAX5258/MAX5259

General DescriptionThe MAX5258/MAX5259 are +3V/+5V single-supply,digital serial-input, voltage-output, 8-bit octal digital-to-analog converters (DACs)

Pagina 2

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers10 ________________________________________________________________

Pagina 3

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers___________________________________________________________________

Pagina 4

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers12 ________________________________________________________________

Pagina 5

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers___________________________________________________________________

Pagina 6

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers14 ________________________________________________________________

Pagina 7

LDAC Operation (Hardware)LDAC is typically used in 4-wire interfaces (Figure 4).This command is level sensitive, and it allows asyn-chronous hardware

Pagina 8

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers16 ________________________________________________________________

Pagina 9

Power SequencingThe voltage applied to REF should not exceed VDDatany time. If proper power sequencing is not possible,connect an external Schottky di

Pagina 10

MAX5258/MAX5259Note: 1LSB = (VREF) ✕(28) = +VREF (1 / 256)____________________Chip Information TRANSISTOR COUNT: 13625PROCESS: BiCMOS+3V/+5V, Low-Powe

Pagina 11

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers___________________________________________________________________

Pagina 12

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers2 _________________________________________________________________

Pagina 13

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DACwith Rail-to-Rail Output BuffersMaxim cannot assume responsibility for use of any circuitry other th

Pagina 14

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers___________________________________________________________________

Pagina 15

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers4 _________________________________________________________________

Pagina 16

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers___________________________________________________________________

Pagina 17

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers6 _________________________________________________________________

Pagina 18

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers___________________________________________________________________

Pagina 19

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers8 _________________________________________________________________

Pagina 20

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers___________________________________________________________________

Comentarios a estos manuales

Sin comentarios