Rainbow-electronics MAX1338 Manual de usuario

Busca en linea o descarga Manual de usuario para Sensores Rainbow-electronics MAX1338. Rainbow Electronics MAX1338 User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 24
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
General Description
The MAX1338 14-bit, analog-to-digital converter (ADC)
offers four simultaneously sampled, fully differential input
channels, with independent track-and-hold (T/H) circuitry
for each channel. The input channels are individually
software programmable for input ranges of ±10V, ±5V,
±2.5V, and ±1.25V. The input channels feature fault tol-
erance to ±17V. The internal T/H circuits have a 16ns
aperture delay and 100ps aperture-delay matching.
A 14-bit parallel bus provides the conversion result with
a maximum per-channel output rate of 150ksps
(600ksps for all four channels). The MAX1338 has an
on-board oscillator and 2.5V internal reference. An
external clock and/or reference can also be used.
The MAX1338 operates from a +5V supply for analog
inputs and digital core. The device operates from a +2.7V
to +5.25V supply for the digital I/O lines. The MAX1338
features two power-saving modes: standby mode and
shutdown mode. Standby mode allows rapid wake-up
and reduces quiescent current to 4mA (typ), and shut-
down mode reduces sleep current to less than 10µA (typ).
The MAX1338 is available in an 8mm x 8mm x 0.8mm,
56-pin, thin QFN package. The device operates over
the extended -40°C to +85°C temperature range.
Applications
Multiple-Channel Data Recorders
Vibration Analysis
Motor Control: 3-Phase Voltage, Current, and
Power Measurement
Optical Communication Equipment
Features
150ksps Sample Rate per Channel
All Four Input Channels Simultaneously Sampled
16ns Aperture Delay
100ps Aperture-Delay Matching
Channel-Independent Software-Selectable Input
Range: ±10V, ±5V, ±2.5V, ±1.25V
±17V Fault-Tolerant Inputs
Dynamic Performance at 10kHz Input
SNR: 77dB
SINAD: 76dB
SFDR: 98dBc
THD: -83dBc
DC Performance
INL: ±2 LSB
DNL: ±1 LSB
Offset Error: ±4 LSB
Gain Error: ±0.1% FSR
14-Bit Parallel Interface
Internal Clock and Reference Voltage
+5V Analog and Digital Supplies
+2.7V to +5.25V Digital I/O Supply
56-Pin Thin QFN Package (8mm x 8mm x 0.8mm)
MAX1338
14-Bit, 4-Channel, Software-Programmable,
Multiranging, Simultaneous-Sampling ADC
________________________________________________________________ Maxim Integrated Products 1
Ordering Information
19-3151; Rev 0; 4/04
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
PART TEMP RANGE PIN-PACKAGE
MAX1338ETN -40°C to +85°C 56 Thin QFN-EP*
*EP = Exposed pad.
Pin Configuration appears at end of data sheet.
Vista de pagina 0
1 2 3 4 5 6 ... 23 24

Indice de contenidos

Pagina 1 - Ordering Information

General DescriptionThe MAX1338 14-bit, analog-to-digital converter (ADC)offers four simultaneously sampled, fully differential inputchannels, with ind

Pagina 2 - ELECTRICAL CHARACTERISTICS

MAX133814-Bit, 4-Channel, Software-Programmable,Multiranging, Simultaneous-Sampling ADC10 ____________________________________________________________

Pagina 3

MAX133814-Bit, 4-Channel, Software-Programmable,Multiranging, Simultaneous-Sampling ADC_______________________________________________________________

Pagina 4

MAX1338Detailed DescriptionThe MAX1338 simultaneously samples four differentialanalog inputs with internal T/H circuits, and sequentiallyconverts them

Pagina 5

Power-Supply InputsThree separate power supplies power the MAX1338. A+5V analog supply, AVDD, powers the analog input andconverter sections. A +5V dig

Pagina 6 - TO OUTPUT PIN

MAX1338Figure 3 shows the equivalent analog input T/H circuitfor one analog input.As conversion begins, the T/H circuits hold the analogsignals. After

Pagina 7

External ClockFor external clock operation, force INTCLK/EXTCLK lowand connect an external clock source to CLK. Use anexternal clock frequency from 1M

Pagina 8

MAX1338Starting a ConversionInternal ClockFor internal clock operation, force INTCLK/EXTCLKhigh. To start a conversion using internal clock mode,pull

Pagina 9

onto the bus. After reading all four channels, bring CShigh to release the parallel I/O. After waiting tQUIET,pulse CONVST low to initiate the next co

Pagina 10

MAX1338Input Range SettingsTable 4 shows the two’s complement output for a selec-tion of inputs.The full-scale input range (FSR) depends on the select

Pagina 11 - Pin Description

DefinitionsIntegral Nonlinearity (INL)Integral nonlinearity is the deviation of the values on anactual transfer function from a straight line. For the

Pagina 12 - Pin Description (continued)

MAX133814-Bit, 4-Channel, Software-Programmable,Multiranging, Simultaneous-Sampling ADC2 _____________________________________________________________

Pagina 13 - Analog Inputs

MAX1338Gain ErrorGain error indicates how well the slope of the actualtransfer function matches the slope of the ideal transferfunction. For the MAX13

Pagina 14 - Clock Modes

SNR = (6.02 x N + 1.76)dBwhere N = 14 bits. In reality, there are other noisesources such as thermal noise, reference noise, andclock jitter. SNR is c

Pagina 15 - Applications Sections

MAX133814-Bit, 4-Channel, Software-Programmable,Multiranging, Simultaneous-Sampling ADC22 ____________________________________________________________

Pagina 16 - Reading a Conversion Result

MAX133814-Bit, 4-Channel, Software-Programmable,Multiranging, Simultaneous-Sampling ADC_______________________________________________________________

Pagina 17 - Transfer Functions

MAX133814-Bit, 4-Channel, Software-Programmable,Multiranging, Simultaneous-Sampling ADCMaxim cannot assume responsibility for use of any circuitry oth

Pagina 18 - Applications Information

MAX133814-Bit, 4-Channel, Software-Programmable,Multiranging, Simultaneous-Sampling ADC_______________________________________________________________

Pagina 19 - Definitions

MAX133814-Bit, 4-Channel, Software-Programmable,Multiranging, Simultaneous-Sampling ADC4 _____________________________________________________________

Pagina 20 - Signal-to-Noise Ratio (SNR)

MAX133814-Bit, 4-Channel, Software-Programmable,Multiranging, Simultaneous-Sampling ADC_______________________________________________________________

Pagina 21

MAX133814-Bit, 4-Channel, Software-Programmable,Multiranging, Simultaneous-Sampling ADC6 _____________________________________________________________

Pagina 22 - Typical Operating Circuit

MAX133814-Bit, 4-Channel, Software-Programmable,Multiranging, Simultaneous-Sampling ADC_______________________________________________________________

Pagina 23 - Chip Information

MAX133814-Bit, 4-Channel, Software-Programmable,Multiranging, Simultaneous-Sampling ADC8 _____________________________________________________________

Pagina 24 - Package Information

MAX133814-Bit, 4-Channel, Software-Programmable,Multiranging, Simultaneous-Sampling ADC_______________________________________________________________

Comentarios a estos manuales

Sin comentarios