Rainbow-electronics LM93 Manual de usuario descargar pdf (Pagina 20)

14.0 SMBus Interface (Continued)

14.5.2 Block Command Code Summary

Block command codes control the block read and write operations of the LM93 as summarized in the following table:

Command Code Name Value Description

Block Write Command F0h SMBus Block Write Command Code

Block Read Command F1h SMBus Block Write/Read Process Call

Fixed Block 0 F2h Fixed Block Read Command Code: address 40h, size 8 bytes

Fixed Block 1 F3h Fixed Block Read Command Code: address 48h, size 8 bytes

Fixed Block 2 F4h Fixed Block Read Command Code: address 50h, size 6 bytes

Fixed Block 3 F5h Fixed Block Read Command Code: address 56h, size 16 bytes

Fixed Block 4 F6h Fixed Block Read Command Code: address 67h, size 4 bytes

Fixed Block 5 F7h Fixed Block Read Command Code: address 6Eh, size 8 bytes

Fixed Block 6 F8h Fixed Block Read Command Code: address 78h, size 12 bytes

Fixed Block 7 F9h Fixed Block Read Command Code: address 90h, size 32 bytes

Fixed Block 8 FAh Fixed Block Read Command Code: address B4h, size 8 bytes

Fixed Block 9 FBh Fixed Block Read Command Code: address C8h, size 8 bytes

Fixed Block 10 FCh Fixed Block Read Command Code: address D00h, size 16 bytes

Fixed Block 11 FDh Fixed Block Read Command Code: address E5h, size 9 bytes

14.5.3 Write Operations

The LM93 supports the following SMBus write protocols.

14.5.3.1 Write Byte

In this operation the master device sends an address byte and one data byte to the slave device, as follows:

1. The master device asserts a START condition.

2. The master sends the 7-bit slave address followed by the write bit (low).

3. The addressed slave device asserts ACK.

4. The master sends a command code (register address).

5. The slave asserts ACK.

6. The master sends the data byte.

7. The slave asserts ACK.

8. The master asserts a STOP condition to end the transaction.

12 34 5678

S Slave

Address

W A Register

Address

A Data

Byte

14.5.3.2 Write Word

In this operation the master device sends an address byte and two data bytes to the slave device, as follows:

1. The master device asserts a START condition.

2. The master sends the 7-bit slave address followed by the write bit (low).

3. The addressed slave device asserts ACK.

4. The master sends a command code (register address).

5. The slave asserts ACK.

6. The master sends the low data byte.

7. The slave asserts ACK.

8. The master sends the high data byte.

9. The slave asserts ACK.

10. The master asserts a STOP condition to end the transaction.

12 34 56 78 910

S Slave

Address

W A Register

Address

A Data Byte

Low

A Data Byte

High

LM93

www.national.com 20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 91 92

Comentarios a estos manuales

Sin comentarios

Rainbow-electronics LM93 Manual de usuario Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Rainbow-electronics LM93