Rainbow-electronics LM63 Manual de usuario descargar pdf (Pagina 2)

Pin Descriptions

Pin Name Input/Output Function and Connection

Power Supply Input

Connect to a low-noise +3.3

0.3 VDC power supply, and bypass to GND

with a 0.1 µF ceramic capacitor in parallel with a 100 pF ceramic capacitor.

A bulk capacitance of 10 µF needs to be in the vicinity of the LM63’s V

pin.

2 D+ Analog Input

Connect to the anode (positive side) of the remote diode. A 2.2 nF ceramic

capacitor must be connected between pins 2 and 3.

3 D− Analog Input

Connect to the cathode (negative side) of the remote diode. A 2.2 nF

ceramic capacitor must be connected between pins 2 and 3.

4 PWM

Open-Drain

Digital Output

Open-Drain Digital Output. Connect to fan drive circuitry. The power-on

default for this pin is low (pin 4 pulled to ground).

5 GND Ground This is the analog and digital ground return.

6 ALERT/TACH

Digital I/O

Depending on how the LM63 is programmed, this pin is either an

open-drain ALERT output or a tachometer input for measuring fan speed.

The power-on default for this pin is the ALERT function.

7 SMBDAT

Digital Input/

Open-Drain Output

This is the bi-directional SMBus data line.

8 SMBCLK Digital Input Digital Input. This is the SMBus clock input.

Simplified Block Diagram

20057002

LM63

www.national.com 2

1 2 3 4 5 6 7 ... 27 28

Sin comentarios

Rainbow-electronics LM63 Manual de usuario Pagina 2