Rainbow-electronics ATtiny2313 Manual de usuario Pagina 161

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 211
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 160
161
ATtiny2313
2543A–AVR–08/03
Fuse Bits The ATtiny2313 has three Fuse bytes. Table 68 and Table 69 describe briefly the func-
tionality of all the fuses and how they are mapped into the Fuse bytes. Note that the
fuses are read as logical zero, “0”, if they are programmed.
Note: 1. The SPIEN Fuse is not accessible in serial programming mode.
2. See “Watchdog Timer Control Register – WDTCR” on page 40 for details.
3. Never ship a product with the DWEN Fuse programmed regardless of the setting of
Lock bits. A programmed DWEN Fuse enables some parts of the clock system to be
running in all sleep modes. This may increase the power consumption.
4. See Table 16 on page 36 for BODLEVEL Fuse decoding.
5. See “Alternate Functions of Port A” on page 54 for description of RSTDISBL Fuse.
Table 67. Fuse Extended Byte
Fuse Extended
Byte
Bit
No Description Default Value
7 1 (unprogrammed)
6 1 (unprogrammed)
5 1 (unprogrammed)
4 1 (unprogrammed)
3 1 (unprogrammed)
2 1 (unprogrammed)
1 1 (unprogrammed)
SPMEN 0 Self Programming Enable 1 (unprogrammed)
Table 68. Fuse High Byte
Fuse High Byte
Bit
No Description Default Value
DWEN
(3)
7 debugWIRE Enable 1 (unprogrammed)
EESAVE 6
EEPROM memory is preserved
through the Chip Erase
1 (unprogrammed, EEPROM
not preserved)
SPIEN
(1)
5
Enable Serial Program and Data
Downloading
0 (programmed, SPI prog.
enabled)
WDTON
(2)
4 Watchdog Timer always on 1 (unprogrammed)
BODLEVEL2
(4)
3 Brown-out Detector trigger level 1 (unprogrammed)
BODLEVEL1
(4)
2 Brown-out Detector trigger level 1 (unprogrammed)
BODLEVEL0
(4)
1 Brown-out Detector trigger level 1 (unprogrammed)
RSTDISBL
(5)
0 External Reset disable 1 (unprogrammed)
Vista de pagina 160
1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 210 211

Comentarios a estos manuales

Sin comentarios