Rainbow-electronics MAX3345E Manual de usuario

Busca en linea o descarga Manual de usuario para Panel De Control Rainbow-electronics MAX3345E. Rainbow Electronics MAX3345E User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 15
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
General Description
The MAX3344E/MAX3345E USB transceivers convert
logic-level signals to USB signals, and USB signals to
logic-level signals. An internal 1.5k USB pullup resistor
supports full-speed (12Mbps) USB operation. The
MAX3344E/MAX3345E provide built-in ±15kV ESD-pro-
tection circuitry on the USB I/O pins, D+ and D-, and V
CC
.
The MAX3344E/MAX3345E operate with logic supply
voltages as low as 1.65V, ensuring compatibility with
low-voltage ASICs. The suspend mode lowers supply
current to less than 40µA. An enumerate function allows
devices to logically disconnect while plugged in. The
MAX3344E/MAX3345E are fully compliant with USB
specification 1.1, and full-speed operation under USB
specification 2.0.
The MAX3344E/MAX3345E have a USB detect that mon-
itors the USB bus for insertion and signals this event. The
MAX3344E USB_DET threshold is between 3.6V (min)
and 4V (max), while the MAX3345E USB_DET threshold
is between 1V (min) and 2.8V (max).
The MAX3344E/MAX3345E are available in the miniature
4
4 UCSP™, as well as the small 16-pin TSSOP, and
are specified over the extended temperature range,
-40°C to +85°C.
Applications
Cell Phones
PC Peripherals
Information Appliances
Data Cradles
PDAs
MP3 Players
Digital Cameras
Features
±15kV ESD Protection On D+ and D-
Comply with USB Specification 1.1 (Full Speed 2.0)
Separate VP and VM Inputs/Outputs
V
L
Down to 1.65V Allows Connection with Low-
Voltage ASICs
Enumerate Input—Allows USB Connection
through Software
USB Detect Function
3.6V (min) to 4V (max)—MAX3344E
1V (min) to 2.8V (max)—MAX3345E
Allow Single-Ended or Differential Logic I/O
Internal Linear Regulator Allows Direct Powering
from the USB
Internal Pullup Resistor for Full-Speed Operation
Three-State Outputs
No Power-Supply Sequencing Required
Driver Active in Suspend Mode
Available in Miniature Chip-Scale Package
MAX3344E/MAX3345E
±15kV ESD-Protected USB Transceivers
in UCSP with USB Detect
________________________________________________________________ Maxim Integrated Products 1
Ordering Information
19-3171; Rev 0; 2/04
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
PART
TEMP RANGE
PIN-PACKAGE
MAX3344EEUE
-40°C to +85°C
16 TSSOP
MAX3344EEBE-T
-40°C to +85°C
4 x 4 UCSP
MAX3345EEUE
-40°C to +85°C
16 TSSOP
MAX3345EEBE-T
-40°C to +85°C
4 x 4 UCSP
Pin Configurations appear at end of data sheet.
UCSP is a trademark of Maxim Integrated Products, Inc.
USB
INTERFACE
CONNECTOR
V
L
RCV
VPI
VMI
SUSP
D+
D-
V
BUS
D+
D-
GND
SYSTEM
SUPPLY
VOLTAGE
USB_DET
MODE
VTRM
ENUM
VPO
VMO
SYSTEM INTERFACE
V
CC
OE
23.7
23.7
MAX3344E/
MAX3345E
GND
0.1µF
1µF
1µF
Typical Operating Circuit
Vista de pagina 0
1 2 3 4 5 6 ... 14 15

Indice de contenidos

Pagina 1 - MAX3344E/MAX3345E

General DescriptionThe MAX3344E/MAX3345E USB transceivers convertlogic-level signals to USB signals, and USB signals tologic-level signals. An interna

Pagina 2

MAX3344E/MAX3345E±15kV ESD-Protected USB Transceiversin UCSP with USB Detect10 _______________________________________________________________________

Pagina 3

IEC 1000-4-2The IEC 1000-4-2 standard covers ESD testing and per-formance of finished equipment; it does not specificallyrefer to integrated circuits.

Pagina 4

MAX3344E/MAX3345E±15kV ESD-Protected USB Transceiversin UCSP with USB Detect12 _______________________________________________________________________

Pagina 5

MAX3344E/MAX3345E±15kV ESD-Protected USB Transceiversin UCSP with USB Detect__________________________________________________________________________

Pagina 6

MAX3344E/MAX3345E±15kV ESD-Protected USB Transceiversin UCSP with USB Detect14 _______________________________________________________________________

Pagina 7

MAX3344E/MAX3345E±15kV ESD-Protected USB Transceiversin UCSP with USB DetectMaxim cannot assume responsibility for use of any circuitry other than cir

Pagina 8

MAX3344E/MAX3345E±15kV ESD-Protected USB Transceiversin UCSP with USB Detect2 ________________________________________________________________________

Pagina 9

MAX3344E/MAX3345E±15kV ESD-Protected USB Transceiversin UCSP with USB Detect__________________________________________________________________________

Pagina 10

Typical Operating Characteristics(VCC= 5V, VL= 3.3V, TA = +25°C, unless otherwise noted.)MAX3344E/MAX3345E±15kV ESD-Protected USB Transceiversin UCSP

Pagina 11

MAX3344E/MAX3345E±15kV ESD-Protected USB Transceiversin UCSP with USB Detect__________________________________________________________________________

Pagina 12

MAX3344E/MAX3345EDetailed DescriptionThe MAX3344E/MAX3345E are bidirectional transceiversthat convert single-ended or differential logic-level signals

Pagina 13

Power-Supply ConfigurationsNormal Operating ModeConnect VLand VCCto system power supplies (Table1). Connect VLto a +1.65V to +3.6V supply. ConnectVCCt

Pagina 14

MAX3344E/MAX3345E±15kV ESD-Protected USB Transceiversin UCSP with USB Detect8 ________________________________________________________________________

Pagina 15

MAX3344E/MAX3345E±15kV ESD-Protected USB Transceiversin UCSP with USB Detect__________________________________________________________________________

Comentarios a estos manuales

Sin comentarios