Rainbow-electronics DS9503 Manual de usuario descargar pdf

1 of 3 102199

SPECIAL FEATURES

§ Zener characteristic with voltage snap–back

to protect against ESD hits

§ High avalanche voltage, low leakage and low

capacitance avoid signal attenuation

§ Compatible to all 5V logic families

§ Space saving, low inductance TSOC surface

mount package

§ On–chip 5Ω resistors for isolation at both

anode and cathode terminals

§ Industrial temperature range

SYMBOL AND CONVENTIONS

PACKAGE OUTLINE

ORDERING INFORMATION

DS9503P 6-lead TSOC package

DESCRIPTION

This DS9503 is designed as an ESD protection device for 1–Wire MicroLAN interfaces. In contrast to the

DS9502, the DS9503 includes two 5Ω isolation resistors on chip. Although 5Ω are negligible during

communication, they represent a high impedance relative to the conducting diode during an ESD event.

Thus, the diode absorbs the energy while the resistors further isolate and protect the circuit at the other

side of the package. If used with circuits that already have a strong ESD–protection at their I/O port, the

ESD protection level is raised to more that 27 kV (IEC 801–2 Reference model). In case of abnormal

ESD hits beyond its maximum ratings the DS9503 will eventually fail “short” thus preventing further

damage.

During normal operation the DS9503 behaves like a regular 7.5V Zener Diode. When the voltage

exceeds the trigger voltage, the I/V characteristic of the device will “snapback” allowing the same or

higher amount of current to flow, but at a significantly lower voltage. As long as a minimum current or

voltage is maintained, the device will stay in the “snapback mode”. If the voltage or the current falls

below the holding voltage or holding current, the device will abruptly change to its normal mode and

conduct only a small leakage current.

VCA

TSOC SURFACE MOUNT PACKAGE

3.7 X 4.0 X 1.5 mm

See Mech. Drawings

Section

TOP VIEW

DS9503

ESD Protection Diode with Resistors

www.dalsemi.com

SIDE VIEW

1 2 3

Indice de contenidos

Pagina 1 - DESCRIPTION

1 of 3 102199SPECIAL FEATURES§ Zener characteristic with voltage snap–backto protect against ESD hits§ High avalanche voltage, low leakage and lowca

Pagina 2 - TYPICAL APPLICATION Figure 4

DS95032 of 3 102199DC CHARACTERISTICS Figure 1DC CHARACTERISTICS DETAIL DRAWING Figure 2TEST PULSE WAVEFORM Figure 3TYPICAL APPLICATION Figure 4

Pagina 3

DS95033 of 3 102199PHYSICAL SPECIFICATIONSSize See mechanical drawingWeight 0.5 gramsABSOLUTE MAXIMUM RATINGS*Operating Temperature –40°C to +85°CS

Comentarios a estos manuales

Sin comentarios

Rainbow-electronics DS9503 Manual de usuario

Busca en linea o descarga Manual de usuario para Panel De Control Rainbow-electronics DS9503. Rainbow Electronics DS9503 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Panel De Control Rainbow-electronics DS9503