Rainbow-electronics QIL-A9260-C11 Manual de usuario descargar pdf (Pagina 30)

 nboot - boot from NAND device

nboot loadAddr dev

QIL-A9260> nand device

Device 0: NAND 256MiB 3,3V 8-bit

QIL-A9260> nboot 21000000 0 a0000

Loading from device 0: NAND 256MiB 3,3V 8-bit (offset 0xa0000)

Image Name: Linux-2.6.21.5

Image Type: ARM Linux Kernel Image (uncompressed)

Data Size: 3146364 Bytes = 3 MB

Load Address: 20008000

Entry Point: 20008000

Automatic boot of image at addr 0x21000000 ...

## Booting image at 21000000 ...

Image Name: Linux-2.6.21.5

Image Type: ARM Linux Kernel Image (uncompressed)

Data Size: 3146364 Bytes = 3 MB

Load Address: 20008000

Entry Point: 20008000

Verifying Checksum ... OK

 nfs - boot image via network using NFS protocol

nfs [loadAddress] [host ip addr:bootfilename]

 nm - memory modify (constant address)

nm [.b, .w, .l] address

- memory modify, read and keep address

The nm command (non-incrementing memory modify) can be used to interactively write different

data several times to the same address.

 ping - send ICMP ECHO_REQUEST to network host

ping pingAddress

QIL-A9260> ping 192.168.1.11

host 192.168.1.11 is alive

QIL-A9260>

 printenv- print environment variables

printenv

- print values of all environment variables

Datasheet GSG-00006-A01 30/34

1 2 ... 25 26 27 28 29 30 31 32 33 34

Sin comentarios

Rainbow-electronics QIL-A9260-C11 Manual de usuario Pagina 30